1-7. Replacing the Switching Regulator
6.
Remove the harness from the wire clips.
10. Reinstall a new switching regulator in the reverse
7.
Remove the six screws, and remove the side frame.
order of steps 1 to 9.
Reattach the switch cap to the POWER switch so that
its wires point downward.
Side frame
POWER switch
Switch cap
Wire clips
8.
Remove the four screws, and remove the switching
regulator in the arrow direction.
9. Remove the switch cap from the POWER switch.
Switching regulator
POWER switch
\
Switch cap
1-10
CCU-DS0/D50P SMV1E