Sony CCU-D50 Service Manual page 29

4-16. Notes on Service of Power Supply (Switching Regulator)
Fixing with Adhesive Compound
The parts shown in the figure below are fixed with an adhesive bond.
When replacing the parts shown in the figure below, be sure to fix them to the original position with a
specified adhesive bond.
+ When a part has being fixed with an adhesive bond between parts, apply the adhesive bond between
parts as well, and when a part has being fixed between the part and board, apply it between the part and
board.
¢ Apply sufficient quantity of an adhesive bond so that the parts does not move even if the parts are
pushed with a finger.
Sony bond SC608LVZ: Sony part No. 7-432-912-52
C106 C130
f
L104
cio) (0,0)
C17 - HS03
1-24
CCU-D50/D50P SMV1E