Removing And Reinstalling The Boards - Sony CCU-D50 Service Manual

4-15. Removing and Reinstalling the Boards
1-15-1. SDI-77 Board
1. Loosen the two fixing screws with stopper, and pull ra sbi case le)
out the SDI unit assembly.
2. Disconnect the harness from the connector CN1 on the
SDI-77 board.
3. Lift up the lead pin as shown in the figure, and discon-
nect the coaxial cable from the connector CN2 on the
SDI-77 board.
SDI panel
SDI case
Fixing screw
(with stopper) 6. Reinstall the board in the reverse order of removal.
Fixing screw
(with stopper)
Lead pin
CCI-D50/D50P SMV1E 1-17