Starting The Engine; Starting The Engine With Jump Leads - Bomag BW 151 AC-5 Operating Instruction

Concerning your safety – Taking the machine into service
3.6.2

Starting the engine

3.6.3

Starting the engine with jump leads

n the seat is correctly adjusted,
n mirrors (if present) are clean and correctly
adjusted.
Do not start the machine with defective
gauges, control lamps or control elements.
The machine must only be started and oper-
ated from the driver's seat.
Before starting and moving the machine make
sure that there are no persons inside the
danger zone.
For starting set all control levers to "neutral
position".
Do not use any starting aids like start pilot or
ether.
The machine must not be operated with dam-
aged, missing or non-functional safety installa-
tions.
After starting check all display instruments.
Do not inhale exhaust fumes, because they
contain toxic substances, which could cause
damage to health, unconsciousness or even
death.
For operation in closed or partly closed rooms
ensure adequate ventilation.
Connect positive with positive and negative
with negative (ground cable) – always connect
the ground strap last and disconnect it first! A
wrong connection will cause severe damage in
the electric system.
BW 151 AC-5 47