6.3.3
Apply the parking brake
Fig. 82
6.3.4
Notes on travel operation
Fig. 83
1. Shift the travel lever to "Middle" position.
ð The machine decelerates to standstill.
2. Engage the travel lever to the right (parking
brake position).
ð The parking brake warning lamp lights
up.
The parking brake also closes auto-
matically when shutting the engine
down.
If the operator leaves his seat while travelling,
the driver's seat warning lamp will light up. The
machine is automatically decelerated down to
standstill and the parking brake is applied after
a short delay.
If the seat is occupied again before the
machine stops completely, the machine will
accelerate again to its previous speed.
If the travel lever is shifted out of neutral posi-
tion to any travel direction after the machine
has stopped and the seat is not occupied, the
machine will not start off. The parking brake is
closed.
1. Occupy the driver's seat to start travel
again from standstill.
ð The driver's seat warning lamp goes out.
2. Shift the travel lever again to the desired
travel direction through the parking brake
position.
BW 151 AC-5
Operation – Travel operation
121