Table of Contents
Advertisement
Concerning your safety – Maintenance work
3.11 Maintenance work
3.11.1 Preliminary remarks
3.11.2 Work on hydraulic lines
58
Comply with the maintenance work described
in the operating and maintenance instructions,
including the information concerning the
replacement of parts.
Maintenance work must only be performed by
qualified and authorized persons.
Always secure the open engine hood before
starting maintenance work in the engine com-
partment.
Do not touch hot engine parts.
For overhead maintenance and assembly work
use the access steps and working platforms
provided or other secure means.
Do not use machine parts as access steps.
Keep unauthorized persons away from the
machine.
Do not perform maintenance work while the
machine is driving or the engine is running.
Park the machine on horizontal, level, firm
ground.
Remove the key from the ignition switch.
pull the key off the main battery switch.
Secure the articulated joint with the articulation
lock.
Relieve hydraulic pressures before working on
hydraulic lines. Hydraulic oil escaping under
pressure can penetrate the skin and cause
severe injury. Immediately call for medical
advice when injured by hydraulic oil.
BW 151 AC-5
Advertisement
Table of Contents
