Replacing The V-Belt - Bomag BW 151 AC-5 Operating Instruction

Fig. 206
8.9.3

Replacing the V-belt

Fig. 207
Fig. 208
Maintenance – Every 500 operating hours
2. Hold the ignition key in position "I" until
clean fuel starts to run out of the bleeding
screw.
3. Tighten the bleeding screw.
4. Check the fuel filter for leaks after a short
test run.
Perform this maintenance work at the
latest after two years.
1. Park the machine in secured condition
Ä Chapter 6.7 'Park the machine in
secured condition.' on page 129.
2. Allow the engine to cool down.
3. Remove the cover.
4. Loosen the tensioning screw (2) and the
screw (1) on the air conditioning com-
pressor.
5. Relieve and remove the V-belt.
BW 151 AC-5 201