Start Switch; Rotary Switch For Travel Lever Button Assignment - Bomag BW 151 AC-5 Operating Instruction

4.1.4

Start switch

Fig. 19
4.1.5

Rotary switch for travel lever button assignment

Fig. 20
Display and control elements – Operator's stand
Position "P"/"0" Ignition off, key can be
Position "I"/"II"
Position "III"
The starter switch is designed with a
re-start lock. The ignition key must first
be turned back to position "0" before a
new starting attempt can be made.
Position "Left"
Position
"Middle"
Position "Right" Push button assignment in
BW 151 AC-5
pulled out
Ignition on, all control and
warning lights light up for a
moment (test function).
Under low temperatures the
preheating control lamp
lights up.
Turn further against spring
pressure, the engine starts,
turn the ignition key back to
position "I" once the engine
has started.
Push button assignment in
travel lever for vibration and
edge cutter
Push button assignment in
travel lever for precision
spreader
travel lever for vibration and
service
77