Display and control elements – Operator's stand
4.1.12 Rotary switch for water spraying system
Fig. 29
4.1.13 Rotary switch for working lights
Fig. 30
4.1.14 Rotary switch for direction indicators
Fig. 31
82
Position "0"
Position "1" to
"10"
Position "MAX" Permanent spraying
Position "Left"
Position "Right" Working lights on (with igni-
Optional equipment
Position
"Middle"
Position "left or
right"
If the cable to the precision chip
spreader is plugged in, the control light
in the rotary switch will also flash. If
the control light does not flash, one of
the indicators on the vehicle or on the
precision chip spreader is defective.
BW 151 AC-5
Spraying off
Interval spraying
Working lights off
tion switch in position "I")
Direction indicators off
Front and rear direction indi-
cators on the corresponding
side are flashing