Checking The Hydraulic Oil Level - Bomag BW 151 AC-5 Operating Instruction

Tests before commissioning – Checking the hydraulic oil level
5.5

Checking the hydraulic oil level

Fig. 57
102
NOTICE!
Components may get damaged!
– Check the hydraulic oil level at
room temperature (approx. 20 °C
(68 °F)).
– If, during the daily inspection of the
oil level the hydraulic oil level is
found to have dropped, check all
lines, hoses and components for
leaks.
– Use only oil of the permitted specifi-
cation
oil' on page 176.
– In hydraulic systems filled with Pan-
olin HLP Synth. 46 always use the
same oil to top up. With other ester
based oils consult the lubrication oil
service of the respective oil manu-
facturer.
Protective equip-
ment:
1. Check the oil level in the inspection glass.
Normal level
Minimum level approx.
2. If necessary fill in hydraulic oil through the
filler neck.
BW 151 AC-5
Ä Chapter 8.3.4 'Hydraulic
n Protective gloves
approx. 3 cm (1.2 in)
below the top edge of the
inspection glass
2
/ height of
3
inspection glass