Checking The Hydraulic Oil Level - Bomag BW 100 AD-5 Operating & Maintenance Instructions

Checks prior to start up – Checking the hydraulic oil level
5.5

Checking the hydraulic oil level

MAX
MIN
Fig. 55
88
NOTICE!
Components may get damaged!
– Check the hydraulic oil level at
– If, during the daily inspection of
– Use only oil of the permitted
Protective equip-
ment:
1. For checking and topping up, clean the
area around the filling port.
2. Remove the cap and check the hydraulic
oil level on the dipstick.
3. The hydraulic oil level must always be
between the "MIN" and "MAX" marks.
ð Top up hydraulic oil.
B-880-0167
4. Close the cap.
BW 100 AD-5
room temperature (approx. 20 °C
(68 °F)).
the oil level the hydraulic oil level
is found to have dropped, check
all lines, hoses and components
for leaks.
Ä Chapter 8.3.4
specification
„Hydraulic oil" on page 145.
n Working clothes
Safety shoes
n
n Protective gloves