Yamaha MC2410M Operating Manual page 16

SYSTEM EXAMPLES
Communication between the monitor operator and the
house soundman is provided in the following manner: the
monitor operator plugs his TB microphone into the TB input
connector on the front panel. The signal from this input is
sent out via the TB OUT connector, to the RETURN input of
the main house console (e.g., a Yamaha MC3204II). If the
echo return input is not available, an input channel could be
used to receive the monitor TB. This signal would not be
assigned to any output on the house console, merely CUE'd
for headphone monitoring by the engineer. The house
soundman sends his TB signal via his foldbaek output to an
input channel on the mixer. The monitor engineer would
then cue the input channel for monitoring in his head¬
phones.
(ALTERNATIVE DIRECT CONNECTION)
TALKBACK—►—AUX OUT
PHONES---RETURN
\
i
P.A. MIXING CONSOLE
(e.g. YAMAHA MC3204II)
RETURN-► PHONES1
IT TALK
TB OUT •« BACK
MC3210M, MC2410M
l
14