Explanation Of The Control Panel; Before Printing - Brother GTX600 SB Instruction Manual

EXPLANATION OF THE CONTROL PANEL

1.5
A
B
C
2 BEFORE PRINTING
If you have not used the machine for a few minutes, the display turns off. By pressing any button, the
display turns on again.
Like said, the machine should never be turned off. Should the machine, for whatever reason, be
switched off completely, you can restart it by flipping the switch next to the power cable. The machine
will start automatically. Depending on how long the machine was turned off, it will start with an
auto cleaning, agitation of the white ink tank and a white ink circulation.
The display shows the current loaded print file with
the used platen and the approximate ink
consumption.
The lower left corner shows the level for ink and
cleaning solution.
The left yellow frame shows the counter of prints
left before the next auto-cleaning, the right frame
indicates if there is any warning.
A: Freely assignable speed dial button
E
B: Button for platen moving
C: Cancel button
D
D: Opens the menu and confirms actions.
E: Cursor buttons for moving through the menus.
F: USB 3.0 port Type A to load print files from an
F G: IC-Stick port. Will be needed for refilling the ink or
G
The LEFT button is the go back button.
USB-stick.
cleaning solution.
4 / 27