Table of Contents
Advertisement
If temperature is too cold: The printer will switch automatically to "Low-Temp Mode" and reduce the
speed. Raise the temperature of the printer's environment.
If temperature is too high: Please turn down the temperature of the surrounding area of the printer.
If humidity is too low: Please turn on the humidifier.
If humidity is too high: Please try to lower the humidity of the surrounding area of the printer.
Always keep the temperature and humidity within the required ranges, otherwise the consumption of
ink and other liquids will increase, due to frequent auto-cleanings. The print results and condition of the
printer could also be affected.
RULE REGARDING THE POWER SUPPLY
1.3
The GTX600 SB should always be left with power ON, also when it is not used.
Power is needed for the daily circulation of white ink and the operation of the humidifier. This process does
not consume ink.
If the GTX600 SB is turned OFF for a long time it might get damaged.
STORAGE OF LIQUIDS
1.4
The liquids should be stored at a temperature between minimum 0 °C and maximum 40 °C.
MAX
40°
M I N
0 °
Only pull the plug in an
emergency or when requested
by a display message!
Please agitate your spare white ink canisters every
week.
Do not use inks or liquids with a temperature below
18 °C or above 30 °C.
3 / 27
Advertisement
Table of Contents
