Table of Contents
Advertisement
This is a guide for all GTX600 SB users.
Be sure that you use the latest Cookbook-Version.
1 GENERAL INFORMATION
The printer should only be used by operators who are appropriately trained in its safe operation.
The printer is not suitable for use in places where children are present.
The machine uses powerful servo motors, inappropriate use may cause severe injuries.
The security keys of the doors have to be kept by trained persons only.
SOFTWARE
1.1
Always make sure that you use the latest software for your GTX600 SB.
You can find the latest versions here:
https://base.brother.digital/driver-firmware/gtx600-sb/
https://base.brother.digital/software-tools/
ENVIRONMENTAL CONDITIONS
1.2
Mandatory temperature and air humidity for the best print result:
MAX
30°
M I N
18 °
The GTX600 SB has a humidifier installed.
ter. It is also recommended to turn it on 30 minutes before the production starts.
possibility to create a schedule for the humidification in the printers menu.
The machine also has 3 temperature and humidity sensors installed. This combination ensures that
the humidity is automatically regulated. The humidifier aims for a humidification of 65 %.
You can always check the current temperature and humidification on the control panel.
Menu
Receiving History
Maintenance
Printer Setting
Total Print
Temperature/Humidity Info
MAX
85
%
M I N
35
%
It should always be switched on while working with the prin-
Temperature/Humidity Info
Outside
Right-hand side [ 22°C ] [ 50 % ]
Left-hand side
Press OK to return
There is the
[ 21°C ] [ 42 % ]
[ 23°C ] [ 47 % ]
2 / 27
Advertisement
Table of Contents
