BodyCraft EXP Series Owner's Manual

Decline kit for the treadmill

Hide thumbs Also See for EXP Series:

Download this manual

T1200 Decline Kit (T1200-DK)

for the BODYCRAFT T1200 Treadmill

Owner's Manual

For the Owner's Manual,

Assembly STEPS in

FULL COLOR

& additional information,

Open your Camera

App and point it at

scan this QR code.

the QR Code

Assembled Parts List

Part #

Assembly Parts List

QTY

Frame, Extension w/ Stabilizer Foot - Flat Base,

T120-DK-001-ASM

for Decline Kit - BLK - Assembly

THE FOLLOWING TOOLS ARE RECOMMENDED FOR EASIER ASSEMBLY:

ADJUSTABLE WRENCH

24mm COMBINATION WRENCH

T1200-DK OM v1.2

Need help?

Do you have a question about the EXP Series and is the answer not in the manual?

Page 1 T1200 Decline Kit (T1200-DK) for the BODYCRAFT T1200 Treadmill Owner’s Manual For the Owner’s Manual, Assembly STEPS in FULL COLOR & additional information, Open your Camera App and point it at scan this QR code. the QR Code Assembled Parts List...
Page 2: Product Assembly
Product Assembly TEP 1 - GENTLY Tip Treadmill on it’s Side TEP 2 - Take off the Rear Stabilizer Feet w/ the Round Rubber Base Recommended Tool: 24mm COMBINATION WRENCH Part # Description Stabilizer Foot - Self Leveling - Round Rubber Base - Rear T120:020...
Page 3 Product Assembly TEP 3 - Install the Decline Kit w/ the Flat Base Feet Part # Assembly Parts List T120-DK-001-ASM Frame, Extension w/ Stabilizer Foot - Flat Base, for Decline Kit - BLK - Assembly TEP 4 - GENTLY Tip Treadmill back Upright, Level & Tighten Jam Nut Watch Leveling the Treadmill on YouTube https://youtu.be/...
Page 4 ● If installing the Decline Kit after the Treadmill is Already Assembled and Calibrated: Go to product setting by pressing the middle of BODYCRAFT logo on home page for a few seconds until the product setting opens.
Page 5 Product Assembly, Calibration for LED Console DECLINE KIT CALIBRATION To ensure product performance, calibration must be performed after the Decline Kit installation. For LED console: ● When Installing the Decline Kit Along with Treadmill: Select DECLINE kit option during calibration process. The message window will display SELECT THE OPTION TO CALIBRATE during calibration process.

Exp t1200Exp t1200-dk