BodyCraft EXP Series Faq

Treadmills with 9" lcd console, engineering modes

Hide thumbs Also See for EXP Series:

1. How to get into the basic Engineering Mode Settings?

A: During idle mode, press "ENTER & SPEED+" KEYS together for a few seconds to get into Engineering mode.

Once you have changed any settings, press ENTER to confirm. You may press the STOP key for a few seconds to

go back to idle mode.

2. How to switch from modes of English or Metric?

A: During idle mode, press "ENTER & SPEED+" KEYS together for a few seconds to get into Engineering mode. 1

selection is UNITS: ENGLISH or METRIC. Press UP/DOWN key to switch from one another and press

ENTER to confirm. You may press the STOP key for a few seconds to go back to idle mode.

3. How to turn the 20 second no-step counter off?

A: D uring idle mode, press "ENTER & INC+" keys for a few seconds to get into 20 second timer mode. The display

will show "20 S TIMER: ON", press UP/DOWN key to turn this off and ENTER key to confirm.

4. Why does my console go into Pause mode after 20 second?

A: T here is a 20 second no-step count timer safety feature built into this console in case any children or pets

jump on the treadmill when adults step away. To turn this feature off, see #2.

5. How to turn the Sleep/power save mode off?

A: The console is built with 10-minute power save mode. You may turn this feature on/off by going to

Engineering mode. Press "ENTER & SPEED+" keys for a few seconds during idle mode and bypass 1

prompt by pressing the ENTER key. It will display "DISPLAY OFF", press UP/DOWN key to turn it ON. The

display will not go into power save mode and it will stay on unless you turn the power off.

6. How to calibrate the console?

A: Press "INC-" key for a few seconds during idle mode to start the calibration mode. Press UP/DOWN key to

select the right treadmill frame model to calibrate.

FAQ & Engineering Modes

EXP-Series Treadmills with 9" LCD Console

(for console serial # beginning with "9LCD")

Table of Contents

Need help?

Do you have a question about the EXP Series and is the answer not in the manual?

Page 1 FAQ & Engineering Modes EXP-Series Treadmills with 9" LCD Console (for console serial # beginning with “9LCD”) 1. How to get into the basic Engineering Mode Settings? A: During idle mode, press “ENTER & SPEED+” KEYS together for a few seconds to get into Engineering mode. Once you have changed any settings, press ENTER to confirm.
Page 2 7. Why does my max speed not match with product specification? A: this could be the console didn’t calibrate to the right product model. T400DC’s max speed is 11mph; T800DC max speed is 12mph and T1000AC max speed is 13mph. Selecting the correct model no. during calibration will ensure the max speed matches the product specification.
Page 3 17. What is the distance for one lap? A: 400m or 1 / 4 mile. 18. What is the min program time allowed? A: To better program performance, the min program time allowed is 10 minutes. 19. Why is 5K/10k lap counter not counting? A: It is because with a 5K/10K program, the whole track is a 5K/10K goal;...
Page 4 28. How to use BLUETOOTH/ANT+ wireless heart rate strap? A: During idle more, press the BLUETOOTH button to turn on Bluetooth function, then follow the display to connect the BLUETOOTH/ANT+ strap first. 29. HOW to connect the APP? A: press BLUETOOTH button to turn on Bluetooth function and follow the display to connect the App. You must connect the App before you start exercise to properly track the usage data.