Removing Aiom Cable; Removing Add-On Module (Aom) - Supermicro AS-2125HS-TNR Disassembly Instructions Manual

5. Removing AIOM Cable

1. Unscrew the two screws (circled in red) using a screwdriver and loosen the thumb screw by hand.
2. Remove the cable from the motherboard.
No. Description
AIOM Cable
5.1

6. Removing Add-on Module (AOM)

1. Loosen the thumbscrew and press down on the push pin.
2. Slide the AOM towards the push pin and lift the AOM out of the system.
No. Description
Add-on Module
6.1
Thumb Screw
6.1
Thumb Screw
Push Pin
13