Table of Contents
Advertisement
PROGRAM
P1
Glasses and plates with light dirt
P1+
Glassware, plastic trays, pre‐washed plates
Sanitisation function
P2
Glasses, cups and plates with light dirt
P2+
Normal cycle for glassware
Sanitisation function
P3
Very dirty dishes and cutlery
P3+
Cycle for sanitising plates and glasses
Sanitisation function
P4
Depending on the duration set.
(*)
The cycle duration stated above refers to three‐phase appliances supplied with hot water at
50°C. If the appliance is supplied with cold water, the cycle duration might increase depending
on the intake water temperature, since the dishwasher is fitted with the HTR system, which
requires set temperature and pressure for rinsing.
To select a supplementary function, when the program required is shown on the display (P1, P2, P3 or
P4) press the
button. Only one supplementary function can be selected for each program.
10.1 Selecting the crys "glassware" function (available in P1‐P2)
Reduces the program's rinsing temperature and duration
After selecting the "Crys" function, perform a cycle with the appliance empty to stabilise the boiler
temperature
9 CHOOSING THE PROGRAM
TYPE OF DIRT
10 SUPPLEMENTARY FUNCTIONS
Press
then press
‐ CW 620/630
Approx 60''
Approx 60''
Approx 90''
Approx 80''
Approx 150''
Approx 4 minutes
As required from 4 to 10 minutes
and hold it down to select the glassware function
to confirm the program start.
28
DURATION (*)
Hide quick links:
Advertisement
Table of Contents
