Smeg CWC620D Manual page 26

When the hood is closed again, the system offers the last program run.
‐ CW 620/630
Load the dishes
Lower the hood and the cycle starts
Select the program required by pressing
Only with Autostart OFF:
Confirm the program start by pressing
down for 1 second (light L2 changes from green to
orange).
Cycle in progress, the progress of the cycle is displayed by
vertical bars which illuminate in sequence. If the hood is
opened "CLOSE" flashes and the program stops; when it is
closed again the program restarts from the beginning.
At the end of the program "End" flashes
Unload the dishes
26
.
and holding it