Tstp (Minimum Rinsing Temperature) Function; Rinse Aid Pump (Display And If Required Reset During Maintenance); Detergent Pump (Display And If Required Reset During Maintenance) - Smeg CWC620D Manual

6.9 tStP (minimum rinsing temperature) function
Set at "on" for minimum rinsing temperature as set; set at "off" for rinsing regardless of boiler
temperature.
If the parameter is set as "off" and hot intake water is not used, the minimum rinsing temperature
might be a few degrees lower than the setting.
If the thermostop device is set "off" the rinsing T° are no longer monitored and the user is
responsible for ensuring that the minimum correct T° are maintained for the tank and boiler. It is
particularly important
Also refer to the insufficient washing/drying /foam in tank point of the "troubleshooting" section :
restore T Stop ON and/or connect the appliance to a hot water supply
6.10 Rinse aid pump (display and if required reset during maintenance)
6.11 Detergent pump (display and if required reset during maintenance)
‐ CW 620/630
Modify the parameter (ON/OFF) by pressing
to check the
To reset, press
To reset, press
19
intake water
for 3 seconds.
for 3 seconds.
.
temperature.