Autostart Function; Regeneration Frequency Setup (Models With Softener) - Smeg CWC620D Manual

6.7 Autostart function
Set at "on" to start the cycle when the hood is closed.
Set at "off" for cycle start after confirmation with the start button
6.8 Regeneration frequency setup (models with softener)
 (Default value: H03; modify the parameter to suit the mains water hardness.
 At first use, the salt tank has to be filled. It is subsequently sufficient simply to fill up with
regenerating salt when necessary.
Important:
During normal operation, the dishwasher will perform
a number of washing cycles while regeneration is in
progress. During this time (5‐6 cycles) the intake
water will not be treated, but this will not affect the
washing quality.
With values over 60°f an external water treatment device must be used and the regeneration frequency
must be set on H00.
‐ CW 620/630
Modify the parameter (ON/OFF) by pressing
Hardness
(°dH German
Modify the degrees)
value of the Regeneration
parameter
by pressing
.
22.5
33.5
18
Hardness (°dF
French
degrees)
Regeneration off
off
8.5 15
11 20
17 30
40
28 50
60
.
Setting
level
H00
H01
H02
H03
H04
H05
H06