Choosing The Program; Loading The Dishes - Smeg CWG400B Manual

8.4 Changing the program (not possible once the program has started)
R
R
PROGRAM
Glasses and cups
P1
Glasses, cups and plates with light dirt
P2
Very dirty dishes and cutlery
P3
(*) The cycle duration stated above is guaranteed if the appliance is connected to hot water > 50°C <60°C
If the dishwasher is supplied with cold water, the cycle duration might increase depending on the intake
water temperature and the "thermostop" setting.

LOADING THE DISHES

Plates
The equipment basket is able to
take 8 plates.
Remove solid residues (bones,
fruit peel, stones, etc.) and soak
plates with dried residues of
cheese, egg, etc. in water before
loading in the dishwasher.
Glasses
Load glasses upside down.
Cutlery
Use the special basket(s). Load cutlery loose, preferably with the handle at the bottom, taking care not to injure
yourself with fork prongs or knife blades.
52
52

9 CHOOSING THE PROGRAM

TYPE OF DIRT
If the master switch is not turned off, the appliance offers
the last cycle run. To change, press the button of the
program required; the light comes on.
To confirm hold down for about 2". The LED starts to
flash and the washing cycle starts.
Short 2'
Average 2' 30"
Long 3'
16
DURATION (*)