Table of Contents
Advertisement
PROGRAM
P1
Glasses and cups
P2
Glasses, cups with light dirt
P3
Very dirty glasses and cutlery
P4
Depending on the duration set.
(*)
The cycle duration stated above refers to three-phase appliances supplied with hot water at
50°C. If the appliance is supplied with cold water, the cycle duration might increase depending
on the intake water temperature, since the glasswasher is fitted with the HTR system, which
requires set temperature and pressure for rinsing.
Indicator lights showing:
To select a supplementary function, when the program required is shown on the display (P1, P2, P3 or
P4) press the
button. Only one supplementary function can be selected for each program.
10.1 Selecting the crys"glassware" function (available in P1-P2)
Reduces the program's rinsing temperature and duration
After selecting the "Crys" function, perform a cycle with the appliance empty to stabilise the boiler
temperature
10.2 Selecting the erin "extra rinse" function (available in P1-P2-P3-P4)
Extends the duration of the rinse
9 CHOOSING THE PROGRAM
TYPE OF DIRT
10 SUPPLEMENTARY FUNCTIONS
off;
green;
orange;
flashing.
Press
and hold it down to select the glassware
function then press
22
DURATION (*)
Short, about 1' 30";
1' with glassware function active.
Average, about 2' 30";
2' with glassware function active.
Long, about 4';
5'30" with sani function active.
As required from 3 to 10'.
to confirm the program start.
Hide quick links:
Advertisement
Table of Contents
