Smeg CWC620D Manual page 4

THIS MANUAL IS AN INTEGRAL PART OF THE DISHWASHER AND MUST ALWAYS BE
POSITIONING, HOOKUP, COMMISSIONING, TROUBLESHOOTING AND REPLACING THE
THE APPLIANCE MUST BE GROUNDED AS REQUIRED BY ELECTRICAL EQUIPMENT
THE DISHWASHER IS INTENDED FOR PROFESSIONAL USE ONLY AND MUST ONLY BE USED BY
AUTHORISED STAFF. IT IS DESIGNED TO WASH TABLEWARE (PLATES, CUPS, BOWLS, OVEN DISHES
AND CUTLERY) AND SIMILAR ITEMS IN THE RESTAURANT AND INSTITUTIONAL CATERING SECTOR,
AND COMPLIES WITH THE INTERNATIONAL STANDARDS ON ELECTRICAL AND MECHANICAL SAFETY
(CEI‐EN‐IEC 60335‐2‐58/61770) AND ELECTROMAGNETIC COMPATIBILITY
(CEI‐IEC‐EN 55014‐1/‐2, 61000‐3;4, 50366).
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR INJURY OR DAMAGE CAUSED BY FAILURE
TO COMPLY WITH THE INSTRUCTIONS IN THE MANUAL, BY INCORRECT USE, BY TAMPERING WITH
EVEN JUST ONE PART OF THE APPLIANCE AND BY THE USE OF NON‐ORIGINAL SPARE PARTS .
THIS APPLIANCE IS TAGGED UNDER EUROPEAN DIRECTIVE 2002/96/EC ON WASTE ELECTRICAL AND
ELECTRONIC EQUIPMENT (WEE).
BY MAKING SURE THAT THIS PRODUCT IS DISPOSED OF CORRECTLY THE USER HELPS TO PREVENT
POTENTIAL DETRIMENTAL EFFECTS ON HEALTH AND THE ENVIRONMENT.
WHEN DECOMMISSIONING THE APPLIANCE COMPLY WITH THE LOCAL WASTE DISPOSAL
REGULATIONS.
FOR FURTHER INFORMATION ON THE TREATMENT, RECOVERY AND RECYCLING OF THIS PRODUCT,
CONTACT THE COMPETENT LOCAL OFFICE, THE DOMESTIC WASTE COLLECTION SERVICE, OR THE
SHOP WHERE THE PRODUCT WAS PURCHASED.
KEPT INTACT TOGETHER WITH THE APPLIANCE.
POWER CABLE MUST ALWAYS BE CARRIED OUT BY QUALIFIED STAFF.
‐ CW 620/630
SAFETY STANDARDS.
4