Pch-Io Configuration - Avalue Technology RX680R User Manual

RX680R User's Manual

3.6.3.2 PCH-IO Configuration

Item
LVDS Board I225
LAN 1 Controller
LVDS Board I225
LAN 2 Controller
Wake On Lan from
LAN Device
DeepSx Power Policies
State After G3
GPIO Group Control
Chassis Intrusion
62 RX680R User's Manual
Options
Enabled[Default],
Disabled
Enabled[Default],
Disabled
Enabled[Default],
Disabled
Disabled[Default],
Enabled in S4-S5-Battery
Enabled in S5-Battery
Enabled in S4-S5
Enabled in S5
S0 State
S5 State
Last State[Default],
Disabled[Default],
Enabled
Disabled[Default],
Enabled
Reset
Description
Enable or disable onboard I225 LAN 1
Enable or disable onboard I225 LAN 2
Enable or disable WOL from I225 LAN Device.
configure the DeepSx Mode configuration.
Specify what state to go to when power is re-applied
after a power failure (G3 state).
GPIO Header Control Enable/Disable.
Configure Chassis Intrusion.