Table of Contents
Advertisement
Item
Enable ACPI Auto
Configuration
Enable Hibernation
ACPI Sleep State
3.6.2.5 NCT6126D Super IO Configuration
You can use this item to set up or change the Super IO configuration for serial ports. Please
refer to 3.6.2.5.1~ 3.6.2.5.7 for more information.
Item
WatchDog Count Mode
WatchDog Timeout Value
Serial Port 1 Configuration
Serial Port 2 Configuration
Serial Port 3 Configuration
Serial Port 4 Configuration
Serial Port 5 Configuration
Serial Port 6 Configuration
Options
Disabled[Default],
Enabled
Disabled
Enabled[Default],
Suspend Disabled,
S3 (Suspend to RAM)[Default]
Options
Second[Default],
Minute
0
Set Parameters of Serial Port 1 (COMA).
Set Parameters of Serial Port 2 (COMB).
Set Parameters of Serial Port 3 (COMC).
Set Parameters of Serial Port 4 (COMD).
Set Parameters of Serial Port 5 (COME).
Set Parameters of Serial Port 6 (COMF).
Description
Enables or Disables BIOS ACPI Auto
Configuration.
Enables or Disables System ability to Hibernate
(OS/S4 Sleep State). This option may not be
effective with some operating systems.
Select the highest ACPI sleep state the system
will enter when the SUSPEND button is
pressed.
Description
Configure watchdog count mode.
Configure watchdog Timeout Value.
RX680R User's Manual 43
User's Manual
Advertisement
Table of Contents
