Drive Chain - bimota TESI H2 2022 Assembly & Preparation Manual

Drive Chain

Drive Chain Lubrication
Lubrication is necessary after riding through rain or on wet roads, or any time
that the chain appears dry.
Use a lubricant for sealed chains to
Prevent deterioration of chain seals. If the chain is especially dirty, clean it using a
cleaner for sealed chains following the instructions supplied by the chain cleaner
manufacturer.
•
Apply lubricant to the sides of the Rollers so that it will penetrate to the Rollers and
bushings.
Apply lubricant to the seals so that the seals will be coated with lubricant. Wipe
off any excess lubricant.
Wipe off any lubricant that gets on the tire surface.
Drive Chain Slack Inspection
Set the motorcycle up on its side stand.
•
Clean the chain if it is dirty, and lubrificate.
•
Rotate the rear wheel to find the position where the chain is tightest, and
Measure the maximum chain slack by pulling up and pushing down the chain
midway between the engine sprocket and rear wheel sprocket
.
20