Table of Contents
Advertisement
Recommended Engine Oil
Type:
API SG, SH, SJ, SL or SM with
JASO
MA, MA1 or MA2
rating Viscosity:
SAE 10W-40
NOTE
○
Do not add any chemical additives
to the oil. Oils fulfilling the above
re-quirements are fully formulated
and provide adequate lubrication
for both the engine and the clutch.
Engine Oil Capacity
3.9 L (4.1 US qt)
[when filter is not removed]
4.4 L (4.7 US qt)
[when filter is removed]
Coolant
Coolant Level Inspection
•
Position the motorcycle so that it
is perpendicular to the ground
•
Check the coolant level through
the coolant level gauge on the
reserve tank located to the
behind of the right middle fairing.
Should be between the F (Full)
and L (Low) level lines.
A.F (Full) Level Line
B.L (Low) Level Line
C.Reserve Tank
Although
10W-40
recommended oil for most conditions, the oil
viscosity may need to be changed to
accommodate atmospheric conditions in your
riding area.
•
If the amount of coolant is insufficient,
add coolant into the reserve tank.
Coolant Filling
•
Remove the tank cap.
. Tank cap
A
•
Remove the cap from the reserve
tank and add coolant through the
fill- er opening to the F (Full) level
line.
engine
oil
is
the
18
Advertisement
Table of Contents
