Table of Contents
Advertisement
A.Front Brake Fluid Reservoir
B.Upper LevelLine
C.Lower Level Line
A.Rear Brake Fluid Reservoir
B.Upper LevelLine
C.Lower Level Line
•
If the fluid level is lower than the lower
level line it may indicate that the fluid is
leaking. In this case, have the brake system
inspected by an authorized Bimota dealer.
Brake Light Switches
Brake Light Switch Inspection
Turn the ignitions witch on
•
The brake light should go on when
the front brake is applied and or the
rear brake is applied.
•
I fit does not, ask your authorized
Bimota dealer to inspect the front
Brake lights witch and or the rear brake
light switch.
.
Brake Pad Wear Inspection
Inspect the brakes for wear. F or front disc
brake caliper, if the thickness of either pad
lining is less than 1 mm (0.04 in.), replace both
pads in the caliper as a set. Pad replacement
should be done by an authorized Bimota
dealer.
A.Front Brake Pads
B.Pad Lining
C. 1 mm (0.04 in.)
For rear disc brake caliper, if the thickness of
either pad lining including back plate is less
than 4.5 mm (0.18 in.), replace both pads in the
caliper as a set. Pad replacement should be
done by an authorized Bimota dealer
A.Rear Brake Pads
B.Pad Lining
C.Back Plate D. 4.5 mm (0.18in.)
22
Advertisement
Table of Contents
