Table of Contents
Advertisement
ME5 Meter Setup and Operation Instructions
Setup
Terms
The following terms are shown on the display and/or
used often in this instruction manual.
•
R-TOTAL: Resettable Total
Shows the cumulative amount that has been dis-
pensed. Can be reset to zero.
•
TOTAL: Non–Resettable Total
Shows the cumulative amount that has been dis-
pensed for the life of the unit. Cannot be reset.
•
Standard Dispense Mode
Dispense mode in which display counts up from
zero or from where it recently stopped.
•
ASLEEP / AWAKE Mode
Asleep is a battery–saving mode in which the dis-
play goes blank after 45 seconds of inactivity. The
display comes Awake from sleep mode when you
press any button on the keypad or squeeze the trig-
ger to dispense fluid.
312668B
ME5 Meter Setup and Operation Instructions
Keypad Buttons (F
F
. 8
IG
•
TOTAL*
Displays the resettable total, non–resettable total,
and calibration factor.
•
RESET*
Resets the displayed amount to zero or press to
enter the Standard Dispense Mode (see Terms).
* Press the hold Reset and Total
buttons simultaneously to dis-
play Setup Menus (page 8).
All buttons are disabled while fluid is being
dispensed.
. 8)
IG
PTS
QTS
GAL
LITERS
AUTO
R-TOTAL
ti12043A
7
Advertisement
Table of Contents
