Graco ME5 Instructions Manual page 20

PE5 Meter Setup and Operation Instructions
Operation
F . 28
IG
Dispensing Fluid in Manual Mode (F
1. Press and hold the Man-
ual/Reset button.
• If the display was blank
(asleep), it wakes up and
displays the amount that
was displayed before it fell
asleep.
• If the display was awake, and the meter is in
the Manual Dispense Mode, the display clears
to 0.00.
• If the display was awake, and the unit is in the
Viewing Totals mode or the Auto Dispense
Mode, the meter switches to the Manual Dis-
pense Mode.
2. When the display is awake, you can dispense from
zero or from the displayed amount by doing one of
the following.
• Press and hold the Man-
ual/Reset button again to
clear the display to 0.00 if
it is not already at 0.00.
Then go to step 3.
OR
• Go straight to step 3 to dispense from the dis-
played amount.
3. Squeeze the trigger. You may lock it. See Locking
and Unlocking the Trigger, page 14.
20
PTS QTS
GAL
LITERS
AUTO
R-TOTAL
ti12053a
IG
Fluid flows, and the amount displayed counts up from
zero or the previously dispensed amount.
4. Release/unlock the trigger when you have dis-
pensed the desired amount of fluid.
Fluid flow stops. The amount you have dispensed is dis-
played.
You may press and hold the Man-
ual/Reset button again to reset the
displayed amount to zero.
. 28)
When the trigger is released, the automatic nozzle
prevents the fluid in the extension from running out.
312668B