Graco ME5 Instructions Manual page 12

ME5 Meter Setup and Operation Instructions
Viewing Totals
This is the procedure for viewing the non–resettable and
resettable totals in gallons or liters. To change the reset-
table total, see Resettable Total, page 9.
1. If display is blank (in sleep
mode), press and hold either
the Total or Rest button.
AUTO
F . 16
IG
2. Press and hold Total button.
The resettable total amount is
displayed (F . 16).
IG
If the unit of measurement is gallons, quarts, or
pints, the resettable total is displayed in gallons,
(F . 16). If the unit of measurement is liters, the
IG
resettable total is displayed in liters.
12
PTS QTS
GAL
LITERS
R-TOTAL
ti12049a
AUTO
F . 17
IG
3. Press and hold the Total but-
ton again to display the
non-resettable total (F
Each time you press and hold the Total button the
display toggles between the non–resettable and
resettable totals.
4. Press and hold the Reset but-
ton. The unit returns to Stan-
dard Dispense Mode.
PTS QTS
GAL
LITERS
R-TOTAL
ti12050a
. 17).
IG
312668B