Graco ME5 Instructions Manual page 16

PE5 Meter Setup and Operation Instructions
c. Press and hold the Auto / Reset button again to
display the Calibration Menu (F
When this menu is displayed CAL will blink on
the screen.
d. Press the Auto / Reset button again to display
the Auto Preset Amount Menu (F
18). When this menu is displayed, AUTO blinks
and the currently stored auto preset amount is
displayed.
e. Press the Auto / Reset button again to display
the Shut-off Default Amount Menu (F
page 19). When the menu is displayed the
clock icon blinks and the stored shut–off
default amount is displayed.
The value that is displayed when you leave each menu
is the value that is stored.
16
Resettable Total (F
. 25, page 17).
IG
Resets the dispense total to zero or stores the displayed
dispense total. The resettable total accumulates until
the next time it is manually reset.
. 26, page
IG
. 27,
IG
F
IG
1. If the Resettable Total screen is not already dis-
2. R-TOTAL blinks indicating you are on the Resetta-
3. Do ONE of the following.
OR
. 23)
IG
AUTO
. 23
played, complete steps 1 - 2 of the Setup Menus
section.
ble Total Menu screen. The currently stored total
and unit of measurement are displayed.
a. Press and hold the Man-
ual / Reset button to reset
the total to zero (0).
b. Press and hold the Auto /
Reset button to store the
zero (0) measurement
unit. The Units of Mea-
surement Menu displays.
• Press and hold the Auto /
Reset button to store the
currently displayed total.
The Units of Measure-
ment Menu displays.
PTS QTS
GAL
LITERS
R-TOTAL
ti12054a
312668B