Operation; Remote Management; Web; Telnet And Ssh - CyberPower Outlet Series User Manual

OPERATION

Remote Management

The remote management function provides monitoring of
the PDU operational information, controlling outlets and
utilizing SNMP functionality.
We b
Remote management can be performed via web interface.
To access the web interface, please follow the instructions
below:
1. Enter the IP address of the PDU into a web browser.
2. Enter the user name and password of the PDU device at
the authentication screen.
Note: The default username is "cyber" and the default
password is "cyber".
For additional information about the features and
functionality of CyberPower Management Console, please
refer to the Intelligent PDU Web Interface User's Manual
available for download from www.cyberpower.com.

Telnet and SSH

The CyberPower PDU provides Telnet and Secure Shell
(SSH) as Remote Management methods. Telnet uses user
name and password as basic security while SSH has a
higher security level with encryption of the transmitted
packets including user name, password, and data.
Configure the Setting of Telnet and SSH on the Web
Interface. The default user name and password is
cyber; cyber.

SNMP

The CyberPower PDU supports SNMPv1 and SNMPv3
protocols. Download the CyberPower MIB file from www.
cyberpower.com and add it to an SNMP-supported
management software. Default read/write community is
public/private for SNMPv1. SNMPv3 provides a higher
security level than SNMPv1 by encrypting the transmitted
packet. Configure the settings of the SNMPv1/SNMPv3 on
Web Interface.

LCD Operation

The LCD screen provides instant information, such as
voltage, current and power, for the PDU. In addition, users
can use the interface to configure each PDU parameters
and control each outlet on the Switched PDU. The LCD
detects the installation orientation of the PDU (horizontally
or vertically), therefore automatically rotates the screen to
best fit the reading direction.
A. Scroll Mode:
The PDU information will display in following order
automatically when "Scroll Mode On" is configured.
Device Information
Bank 1 Information (2U Series)
Bank 2 Information (2U Series)
Environment Status
(Displays when the ENVIROSENSOR is connected)
Alert
B. Main Menu Map
Current
Alert
Log
Device
Meter Bank
Outlet
Device
Control Bank 1/2
Outlet 1-N
LCD
Setting
Reset
Reboot
Model Name
Serial Number
Network
Daisy Chain
About
(Displays when the PDUs
are connected)
Hardware Version
Frimware Version
26
Immediate On
Delay On
Immediate Off
Delay Off
Reboot
Delay Reboot
Color
Brightness
Direction
Screen Off
Account
(User Name and
Password)
Except TCP
To Default