Electrical Installation - CyberPower Outlet Series User Manual

INSTALLATION GUIDE

Electrical Installation

i
CAUTION! The PDU must be plugged into a three-wire, grounded wall receptacle only.
The wall receptacle must also be connected to an appropriate branch circuit/main with
fuse or circuit breaker protection. Connection to any other type of wall receptacle may
CAUTION! result in a shock hazard.
Step 1. Receptacle evaluation
Ensure that the plug type of your PDU unit matches the wall receptacle type that you are using.
Step 2. Plug the PDU into a CyberPower UPS system (recommended) or the wall receptacle.
Step 3. Attach equipment
It is extremely important not to exceed the PDUs maximum current load (as outlined in the Specifications section).
In order to determine your total load, use the LCD screen on the front of the PDU to monitor the load being attached.
24