Description Of The Rear Panel; Description Of The Front Panel; Smartflex Front Panel; Front Panel Description - Advantech SmartFlex SR303 User Manual

5.8 Description of the rear panel

The rear panel contains two holders for SIM cards (SIM1 and SIM2), a holder for microSD
card (SD) and an RST button used to restore the default configuration and reboot the router.

5.9 Description of the front panel

On the front panel is the following:
Caption Connector
PWR 2-pin
ETH0 RJ45
ETH1 RJ45
ANT SMA
DIV SMA
GPS SMA
WiFi R-SMA
USB USB-A 2.0
Host
I/O 6-pin
Description
Connector for the power supply
Connector for connection into the computer network, PoE (only
for PoE PSE or PoE PD versions)
Connector for connection into the computer network, PoE (only
for PoE PSE or PoE PD versions)
Connector for main antenna
Connector for diversity antenna
Connector for GPS antenna
Connector for WiFi antenna (only for versions with WiFi
module!)
Connector for connection of USB devices to the router. Sup-
ports devices with PL-2303 and FTDI USB/RS232 converters.
Connector for connection of the binary inputs and output
Table 9: Front panel description
Figure 27: SmartFlex front panel
18
SmartFlex SR303