Changing Mac Filtering Settings - Arris SURFboard G54 DOCSIS 3.1 Wi-Fi User Manual

10.To determine the time period between Dynamic Channel Selection scans, set the DCS
scan interval from the DCS Scan Interval drop-down list.
11.Click SAVE SETTINGS.
12.You can change the Wi-Fi connection settings for 5GHz Radio, 5GHz High Radio, and 6GHz
Radio as well.
■ 5GHz Radio: and then perform
To change the 5GHz Radio Configuration settings:
a. Click Wi-Fi > 5GHz Radio on the left pane of the Wi-Fi Connection screen.
b. Perform previous steps 5 through 11.
c. To enable 5GHz supported devices on DFS channels, select Enable under the DFS
option. During this time your system shall scan for DFS channels and disconnects your
5GHz clients that do not support DFS functionality. These clients shall reconnect to
your Wi-Fi network using 2.4GHz.
d. Click SAVE SETTINGS.
To change the 5GHz High Radio Configuration settings:
a. Click Wi-Fi > 5GHz High Radio on the left pane of the Wi-Fi Connection screen.
b. Perform previous steps 5 through 11.
c. To enable 5GHz High supported devices on DFS channels, select Enable under the DFS
option. During this time your system shall scan for DFS channels and disconnects your
5GHz clients that do not support DFS functionality. These clients shall reconnect to
your Wi-Fi network ranging between 2.4GHz to 160GHz.
d. MU-MIMO: Enable or disable
e. Click SAVE SETTINGS.
To change the 6GHz Radio Configuration settings:
a. Click Wi-Fi > 6GHz Radio on the left pane of the Wi-Fi Connection screen.
b. Perform previous steps 5 through 11.
c. MU-MIMO: You can choose to enable or disable the MU-MIMO option.
d. PSC: You can choose to enable or disable the PSC option.
e. Click SAVE SETTINGS.

Changing MAC filtering settings

You can control the Wi-Fi access to your G54 using the MAC filtering settings. These settings
are specific to each Network name (SSID).
To change the MAC filtering mode:
1. Open a web browser and log on to open the G54 Web Manager.
For more information, see
2. Click the Gateway menu link and then click the Connection submenu options link.
3. Click Wi-Fi > MAC Filtering to open the MAC Filtering settings screen.
SURFboard ® G54 DOCSIS ®
Starting your G54 Web Manager
3.1 Wi-Fi ® Cable Modem User Guide DRAFT Revision x.1
Chapter 6: Configuring your Wi-Fi network
(page 29).
38