Restoring The Default Configuration Settings Using Your G54 Web Manager - Arris SURFboard G54 DOCSIS 3.1 Wi-Fi User Manual

1. Insert the end of a paper clip (or other small object with a narrow tip) into the indented
Reset button opening on the rear panel of your G54.
2. Press and hold the small object in place for three to four seconds.
Warning: Do not press the Reset button for more than five seconds. If you do,
your G54 modem shall reset automatically and your custom gateway configuration
settings (e.g., admin password, network name (SSID) and password) shall be
deleted and replaced with the factory default configuration.
3. Remove the paper clip or small object from the Reset button opening.
Restoring the default configuration settings using
your G54 Web Manager
Warning: This action will delete your current G54 configuration settings and allow
you to restore the default (original) G54 configuration.
Note: After the configuration settings are restored, the G54 automatically reboots
and you will have to log in using the default username (admin) and your current
admin password.
To open the Restart/Restore Gateway screen:
1. From the Web Manager screen, click the Troubleshooting menu link.
2. Click Restart/Restore from the Troubleshooting submenu links to display the
Troubleshooting Restart/Restore Gateway screen.
Restore settings screen
3. Click RESTORE Wi-Fi SETTINGS to reset your G54 Wi-Fi settings.
SURFboard ® G54 DOCSIS ®
Chapter 8: Managing your Wi-Fi cable modem and connected networks
3.1 Wi-Fi ® Cable Modem User Guide DRAFT Revision x.1 67