Assigning Permanent Drive Letters - IBM eserver x Series Installation Manual

Figure 9. Assigning permanent drive letters
6. The Write Signature and Upgrade window opens. Click Next, and select the disks
7. Click Finish.
8. Right-click the box labelled DISK 2 Basic, and then click Create Partition. The
9. From the Assign drive letter on path window, select the letter Q. Click Next. A
10. In the Volume Label field, type Quorum; then click Next. Do not change the
11. Click Finish.
12. Repeat step 8 through step 11 for the DISK 3 partition and for other disk parti-
13. Right-click the CD-ROM entry, and then select Change Drive Letter and Path.
14. Select Edit, and then select Z. Click OK to set the drive letter. When the Confirm
15. When you finish assigning permanent drive letters to shared disks, close the
Proceed to "Assigning permanent drive letters for Server 2" on page 17 to continue
configuring your cluster.
16
IBM® xSeries 340 HA Cluster: Installation Guide
to which you want to write signatures.
Create Partition wizard starts. On the following three windows, click Next.
Format option window opens.
name of the NTFS file system.
tions. When creating the partition for DISK 3, use drive letter R and use Data as
the volume label. For additional shared disks, assign sequential drive letters start-
ing with S and assign each volume a unique label.
window opens, click Yes.
Computer Management window.