Configuring Server Network Settings - IBM eserver x Series Installation Manual

4. Select the language that you want to use for your keyboard and click OK; then,
5. Restart the server.
6. Login to Server 2 and repeat step 2 through step 5 for Server 2.
Proceed to "Configuring server network settings" to continue configuring your cluster.

Configuring server network settings

You must have a domain controller in your network for this cluster to function. You
must also have a WINS server in your network, and you might also have a DNS
server.
Note: Refer to your Microsoft documentation for information on WINS servers.
The servers within your cluster are configured with network settings that might not be
compatible with your network environment. If you are not sure if your network is com-
patible, contact your network administrator.
The default network settings for your cluster are located in "Collecting network infor-
mation" on page 24. To modify the network settings for your cluster, use the following
procedure.
Note: You must configure Server 1 before you configure Server 2.
1. Login to Server 1 using the Administrator account and password that you defined
2. Right-click the Network Neighborhood icon; then, select Properties from the
3. If you need to change the server name, click Change.
4. In the Computer Name field, type the new name. Click OK to save the changes
5. Click the Protocols tab; then, select the TCP/IP protocol and click Properties.
26
IBM® xSeries 340 HA Cluster: Installation Guide
click Apply. If you are prompted to insert a disk, type
c:\Microsoft\i386
and then press Enter. Wait for the process to finish.
during server initialization; then, close the Welcome window.
menu.
made. When the Warning window opens, click Yes.