Table of Contents
Advertisement
11. When the Disk Administrator window opens, right-click the white drive box next to
12. Click Assign Drive Letter.
13. Click OK. When the confirmation window opens, click Yes.
14. Close the Disk Administrator window.
Proceed to "ServeRAID security configuration" to continue configuring your cluster.
ServeRAID security configuration
Complete the security configuration on both servers before you attempt to complete
and validate the ServeRAID configuration.
1. On Server 1, click Start
2. When ServeRAID Manager opens, from the Managed Systems tree, click the
3. In the Password and Confirm Password fields, type a ServeRAID administrator
4. On Server 2, click Start
5. When ServeRAID Manager opens, from the Manage Systems tree, click the
6. In the Password and Confirm Password fields, type the same password as you
Proceed to "Completing and validating ServeRAID configuration" to continue configur-
ing your cluster.
Completing and validating ServeRAID configuration
Use the following procedure to complete and validate the ServeRAID configuration on
both servers.
On Server 2,
1. click Start
2. On Server 1, click Start
3. In the Node B field, type the name of Server 2. Click Start to validate the Serv-
4. Click Connect to close the window and start the validation process.
5. After the validation process is complete, click Cancel.
Proceed to "Synchronizing shared disks between the servers" on page 34 to continue
configuring your cluster.
a drive.
letters that match those you assigned to Server 1. Assign drive letters to all drives
and the CD-ROM to match those you assigned in Server 1.
g
name of your Server 1. Select Actions
rity.
password. Click Add to create the default security administrator password. Close
the ServeRAID Agent Security window.
g
name of your Server 2. Select Actions
rity.
did for Server 1. Click Add to create the default security administrator password.
Close the ServeRAID Agent Security window.
g
g
Programs
g
Systems tree click Server 1. Select Actions
Cluster Validation window opens.
eRAID cluster settings. The Connecting to Remote System window opens. In the
Username and Password fields, type admin and the password that you created in
"ServeRAID security configuration".
In the Assign Drive Letter window, select the drive
g
Programs
ServeRAID Manager.
g
Configure ServeRAID Agent
g
Programs
ServeRAID Manager.
g
Configure ServeRAID Agent
ServeRAID Manager.
g
Programs
ServeRAID Manager. On the Managed
g
Validate Cluster. The ServeRAID
Chapter 4. Configuring Windows NT 4.0 Enterprise Edition
g
Secu-
g
Secu-
33
Advertisement
Table of Contents
