Assigning Permanent Drive Letters For Server 2 - IBM eserver x Series Installation Manual

9. Right-click on the box next to DISK 2, and then select Format.
Figure 14. Formatting drives
10. On the Format window, select NTFS under File System. In the Volume Label
11. Repeat step 5 on page 30 through step 10 for the DISK 3 partition and for other
12. Right-click the CD-ROM entry, and select Assign Drive Letter. The Assign Drive
13. When you finish assigning permanent drive letters to shared disks, close Disk

Assigning permanent drive letters for Server 2

Use the following procedure to assign drive letters for Server 2.
1. Verify that the Domain field on Server 2 contains the name of the domain; then,
field type Quorum. Do not select any options in the Format Options frame. To
begin the formatting process on the disk, click Start. A warning window opens.
Click Start to continue the disk formatting process. After the formatting com-
pletes, click OK; then, close the Format window.
shared disk partitions. When creating the partition for DISK 3, use drive letter R
and use Data as the volume label. For additional shared disks, assign sequential
drive letters starting with S and assign each volume a unique label.
Letter window opens. Select Assign Drive Letter, and then from the Assign Drive
Letter drop-box, select Z. Click OK to set the drive letter. When the Confirm win-
dow opens, click Yes.
Administrator by selecting Exit from the Partition menu.
Proceed to "Assigning permanent drive letters for Server 2" to continue configur-
ing your cluster.
login to the domain.
Chapter 4. Configuring Windows NT 4.0 Enterprise Edition
31