IBM eserver x Series Installation Manual page 29

5. In the Cluster Name field, type the same name for the cluster as you did for
Server 1; then, click Next.
Note: Make sure that you use the same password and administrator account as
you did for Server 1.
6. The Select an account window opens, type the domain administrator account
password. The username and domain fields are not available.
7. Click Finish to complete the ServeRAID configuration; then, click OK.
8. From the IBM ServeRAID cluster wizard, click Finish to complete the cluster con-
figuration.
9. Click Finish.
10. Verify that the cluster is running and that the resources are Online. Click Start g
Programs Administrative Tools
11. Open the Resources folder. The resources display an Online status for two serv-
ers in the cluster.
12. Ensure that all resource groups can be brought online in either cluster node by
right-clicking the resource group and selecting Move Group. When the group is
Online in the other cluster node, move the group back to the previous node.
If you want to create additional cluster resources such as IP Addresses, Network
Names, or Generic Applications, see the documentation for that specific application to
review instructions for installation in a Microsoft Cluster Services environment.
Note: Anytime you are prompted to insert your Windows operating system CD, type
c:\Microsoft\i386\ and then press Enter.
Attention: The drivers that are part of your initial cluster configuration have been
tested and certified for clustering. Do not update drivers on your servers without con-
tacting IBM support for assistance.
g
Cluster Administrator.
Chapter 3. Configuring Windows 2000 Advanced Server
g
21