Siemens SIMATIC ET 200SP Equipment Manual page 38

Technical specifications
7.1 Technical specifications
Article number
Alarms
Diagnoses
Diagnostics indication LED
Potential separation channels
Ambient temperature during operation
Altitude during operation relating to sea level
38
• Diagnostic alarm
Monitoring the supply voltage
•
• Wire-break
• Short-circuit to M
• Short-circuit to L+
• Group error
• Monitoring of the supply voltage
(PWR-LED)
• Channel status display
for channel diagnostics
•
• for module diagnostics
Potential separation
between the channels
•
• between the channels and backplane bus
Between the channels and load voltage L+
•
Isolation
Isolation tested with
Standards, approvals, certificates
Suitable for safety functions
Suitable for safety-related tripping of standard
modules
Ambient conditions
• horizontal installation, min.
horizontal installation, max.
•
• vertical installation, min.
• vertical installation, max.
• Installation altitude above sea level, max.
Dimensions
Width
Height
Depth
Weights
Weight, approx.
6ES7132-6BH00-0CA0
Yes
Yes
Yes; channel by channel
Yes; channel by channel
Yes; channel by channel
Yes
Yes; green PWR LED
Yes; green LED
Yes
Yes; green/red DIAG LED
No
Yes
No
707 V DC (type test)
No
No
-30 °C
60 °C
-30 °C
50 °C
5 000 m; restrictions for installation altitudes > 2
000 m, see ET 200SP system manual
15 mm
73 mm
58 mm
26 g
Digital output module DQ 16x24VDC/0.5A HF (6ES7132-6BH00-0CA0)
Equipment Manual, 01/2024, A5E52818470-AA