Siemens SIMATIC ET 200SP Equipment Manual page 44

Parameter data record
A.2 Error codes
Error code in STATUS parameter
(hexadecimal)
Byte 0 Byte 1 Byte 2 Byte 3
DF 80 B2
H H H
DF 80 E0
H H H
DF 80 E0
H H H
DF 80 E1
H H H
DF 80 E1
H H H
DF 80 E1
H H H
44
Meaning
00 Module not accessible.
H
01 Header error (version or specified bits incor­
H
rect).
02 Header error (number or length of paramet­
H
er structures or parameter blocks incorrect)
01 Reserved bit set.
H
02 Invalid diagnostics enable bit set for operat­
H
ing mode.
06 Invalid coding for substitute value behavior. Use valid code for "Reaction to CPU STOP"
H
Solution
• Check station.
• Plug the module in correctly.
• Check parameters of the WRREC block.
Correct version number or fixed bits, see
Header information (Page 42).
Correct the number and length of the para­
meter structures or parameter blocks, see
Header information (Page 42).
Describe all reserved bits with 0.
Correct diagnostics enables. Dependence on
check for wire break parameter, see Struc­
ture of byte x to x+2 for channels 0 to
15 (Page 42-43).
parameter, see Structure of byte x to x+2 for
channels 0 to 15 (Page 42-43).
Digital output module DQ 16x24VDC/0.5A HF (6ES7132-6BH00-0CA0)
Equipment Manual, 01/2024, A5E52818470-AA