Set Certificate Authority - Honeywell RP2F Series User Manual

where values for <sexp> are:
0: Open. This setting cannot be set to any other value than Open if WPA or WPA2 is
currently set to 0.
1: Shared Key
2: Auto
Example
This command sets the authentication type to Open.
ESC{SWF:NA:0}ESC EZ{COMMIT}{LP}
Returns this reply if the command is not successful:
{SWF:NA:1}
Returns this reply if the command is successful:
{SWF:NA:0}
Set Certificate Authority
Specifies a CA (certificate authority) certificate for the printer to use. Use this setting
only for server certificate validation. The CA must be the value used to sign the server
certificate. Before you set this command, you must first send the certificate file to the
directory you plan to set as a certificate path.
Only users with administrative privileges can set this command.
Command
ESC{SWF:CA:<sexp>}ESC EZ{COMMIT}{LP}
where:
<sexp> is a valid certificate path value.
Example
ESC{SWF:CA:tmp/mycert.cer}ESC EZ{COMMIT}{LP}
Returns this reply if the command is not successful:
{SWF:CA:1}
Returns this reply if the command is successful:
{SWF:CA:0}
EZ-Print Command Reference 49