Set Ttls User; Set Validate - Honeywell RP2F Series User Manual

{SWF:E:0}

Set TTLS User

Sets the TTLS (Tunnel Transport layer Security) user name, also known as the EAP
Outer Name, used to log on to the network.
Only users with administrative privileges can set this command.
Command
ESC{SWF:TU:<sexp>}ESC EZ{COMMIT}{LP}
where:
<sexp> is a valid user name. This value can only be set if
Example
ESC{SWF:TU:Gandalf}ESC EZ{COMMIT}{LP}
Returns this reply if the command is not successful:
{SWF:TU:1}
Returns this reply if the command is successful:
{SWF:TU:0}

Set Validate

Verifies if the Server Certificate needs to be validated. This setting is only used when
Set EAP Type
should contain a valid CA Certificate that will be used to validate the Server's
Certificate.
If a real-time clock (RTC) is not installed, the current time cannot be reliably read and
validation does not take into account the current date. Validation may still occur, but
less reliably than with an RTC.
Only users with administrative privileges can set this command.
Command
ESC{SWF:V:<sexp>}ESC EZ{COMMIT}{LP}
where values for <sexp> are:
0: Off
1 (default): On
EZ-Print Command Reference
is set to either TTLS or PEAP. The
EAP Type is set to TTLS.
Set Certificate Authority setting
57