Print Command Format - Honeywell RP2F Series User Manual

Field
MTYP
TMAR
BMAR
CUTP
MTYP in combination with TMAR and BMAR determines the printable area. If you
attempt to print on an area larger than the printable area, the printout is cut off.
Example of Printing Sequence
Step
1
2
3

Print Command Format

Stops the paper or rotates the image, prints images, and alters the images. You can
use a single print command for multiple print lines called a print request.
Command
{PRINT, Global Options:@row,column:Name,Field Options|data|}
Use this table to understand the elements of the print command format:
Element
PRINT,
Global Options:
EZ-Print Command Reference
Reply Description
xxx Maximum printable length in dots. Options are 000 (returns
printer to roll media mode), 600, 800, 1200.
xx Top margin in millimeters.
xx Bottom margin in millimeters.
xx Fine-tunes the media forward a specified numberof dots to
position the perforation closer to the tear bar.
Command
ESC EZ
{MEDIA:MTYP1200,TMAR00,BMAR00,CUTP00}
{LP}
Or,
EZ{MEDIA:MTYP 000,TMAR 10,BMAR 15,CUTP
10}{LP}
Send any printing files or contents to the printer.
ESC EZ{MEDIA:MTYP 000,TMAR 10,BMAR
15,CUTP 10}{LP}
Description
Use a comma after the PRINT command only if there are global options.
Global Options include BACK, DEMAND, QSTOP, QUANTITY, ROTATION, and
STOP. If you use more than one global option, separate each option with a
comma.
Description
Sets the printer to
black mark media
mode.
Sets the printer to con-
tinuous media mode.
Resets the printer to
roll media mode with a
top margin of 10 mm
and a bottom margin
of 15 mm.
15