Chapter 2 - Ez-Print Commands; Bluetooth Commands - Honeywell RP2F Series User Manual

CHAPTER
2
EZ-Print can process these types of commands:
Line Print Mode
l
Easy Print Mode
l
Query
l
Bluetooth
l
Network
l
Wireless
l
EZ-Print cannot process these commands:
Download Fonts
l
Download Graphics
l
Erase All Downloaded Fonts
l
Retrieve Serial Parameters
l
Set Serial Parameters
l
Upgrade Firmware
l

Bluetooth Commands

Use Bluetooth commands to set up the Bluetooth configuration. There are two types
of Bluetooth commands you can send from the host: set (S) and query (Q). All
Bluetooth commands are preceded by the ESC character and you must send the
Commit command
commands are paired with replies. All of the replies are exactly the same as the
Bluetooth commands except:
there is no ESC character.
l
the parameter sections are replaced by status codes (0 = okay, non-zero = error).
l
If data follows a command, the letters are followed by a colon. Each configurable
parameter has a unique letter, followed by a colon, and then the data for that
parameter. Multiple parameters within a command are separated by a semicolon.
Multiple fields within data are separated by a comma. You must send all commands
EZ-Print Command Reference
EZ-PRINT COMMANDS
({COMMIT}{LP}) to invoke all of the Bluetooth commands. These
7